blog

Resilio Sync NAS: Run Resilio on Your NAS (Step by Step)

Resilio Sync NAS: Run Resilio on Your NAS (Step by Step) - Resilio Sync NAS: Run Resilio
Resilio Sync NAS: Run Resilio on Your NAS (Step by Step) - Resilio Sync NAS: Run Resilio

How Do You Run Resilio Sync on a NAS?

To run Resilio Sync on a NAS, install Resilio’s NAS package or its Docker container, open the web interface, and add the NAS folders you want to share. Then link your computers and phones to those folders. The NAS stays online all day, so every device can sync with it even when your other computers are off.

Item What to expect
Why a NAS It is always on, so devices sync with it at any time
Install options NAS package from Resilio or the NAS app store, or a Docker container
Web interface Opens in a browser on your network
Folders Point Resilio at a NAS shared folder
Remote sync Works over the internet with peer-to-peer connections
Backup Still needed; sync spreads deletions

What You Need Before You Start

  • A NAS that supports Resilio Sync packages or Docker. Many Synology and QNAP models do.
  • An admin account on the NAS.
  • A shared folder for synced data, such as ResilioSync.
  • Resilio Sync installed on at least one computer.

Step 1: Prepare a Shared Folder

Create a shared folder on the NAS for Resilio. Keep it separate from folders used by other sync apps. Turn on snapshots if your NAS supports them, so you can roll back if a device deletes files by mistake.

Step 2: Install Resilio Sync on the NAS

You have two common options.

Option A: NAS package. Download the Resilio Sync package for your NAS model from Resilio’s site, or install it from your NAS app store if it is listed. On Synology, use Package Center > Manual Install for a downloaded package.

Option B: Docker container. If your NAS runs Docker or Container Manager, use Resilio’s official image. A typical command looks like this:

docker run -d --name resilio-sync -p 8888:8888 -p 55555:55555 -v /volume1/ResilioSync:/mnt/sync --restart unless-stopped resilio/sync

Adjust the folder path to your NAS. Port 8888 serves the web interface, and port 55555 handles sync traffic. Check Resilio’s documentation for current image details.

Step 3: Open the Web Interface and Create an Identity

  1. In a browser on your network, open http://NAS-IP:8888.
  2. Create a username and strong password for the web interface.
  3. Give the NAS a device name, such as Home-NAS.

Still stuck after these steps?

Send us the exact error message or a description of what you see. We use every request to write or update a fix.

Request a fixLook up an error code

Step 4: Add the NAS Folder and Share It

  1. In the web interface, click the plus button and choose Standard folder.
  2. Select the NAS path, for example /mnt/sync/Documents in Docker.
  3. Click Share and copy the link or key.
  4. Choose Read & Write for devices that edit files, Read only for devices that only receive.

Step 5: Connect Your Computers and Phones

  1. Open Resilio Sync on each computer or phone.
  2. Add the folder using the link, key or QR code.
  3. Choose a local folder, or use selective sync on phones and laptops with little space.
  4. Wait for the first sync to finish, ideally on the home network.

Step 6: Add a Backup

Resilio Sync is sync, not backup. If one device deletes a file, it disappears on the NAS too, after the archive period. Use the NAS’s backup app to send an encrypted, versioned copy offsite. See NAS cloud backup.

Common Errors and Fixes

Problem Cause Fix
Web interface will not load Wrong port or container stopped Check the container is running and port 8888 is mapped
NAS cannot write files Folder permissions Give the Resilio user or container write access
Devices connect only at home Router blocks incoming traffic Allow port 55555 or rely on relays
Sync slow over the internet Upload speed at home Limit to key folders; use selective sync
Files missing after a delete Deletion synced from another device Restore from the archive folder or snapshots

How to Verify the Setup

  1. Add a test file on a laptop.
  2. Confirm it appears in the NAS shared folder.
  3. Turn the laptop off, add a file on another device, and check the NAS receives it.
  4. Turn the laptop back on and confirm it catches up.

Common Mistakes

  • Exposing the web interface to the internet. Keep port 8888 local only.
  • Mixing sync apps on one folder. Give Resilio its own folder.
  • No backup. Snapshots and an offsite copy are essential.

Read our Resilio Sync review for features, or compare it in Resilio Sync vs Syncthing. For other NAS options, see NAS sync and the cloud NAS hub.

Frequently Asked Questions

Which NAS devices support Resilio Sync?

Resilio offers packages for several NAS platforms, and any NAS that runs Docker can use Resilio’s official container. Many Synology and QNAP models fall into one of these groups. Check Resilio’s platform list and your NAS model’s Docker support before you start, since older or entry-level models may lack it.

Do I need to open ports for Resilio Sync on a NAS?

Not always. Resilio can use relays to connect devices behind routers, but a direct connection is usually faster. Forwarding the sync port, 55555 by default in the Docker setup, can improve speed. Never expose the web interface port to the internet; keep it on your local network.

Can Resilio Sync on a NAS replace a cloud service?

For syncing your own devices, yes. The NAS acts as the always-on hub that a cloud server would normally provide. You lose browser access and easy sharing with people who do not use Resilio, and you must handle backups yourself. Many people combine it with an offsite backup service.

Is Resilio Sync a backup for my NAS?

No. Resilio Sync keeps folders identical, so deletions on one device spread to the NAS. It keeps an archive of deleted files for a period, which helps with recent mistakes. For real protection, use NAS snapshots and send an encrypted, versioned backup offsite.

How much memory does Resilio Sync need on a NAS?

Requirements grow with the number of files rather than their size. Small libraries run fine on entry-level NAS models, while folders with hundreds of thousands of files need more memory. Start with your most important folders, watch memory use in the NAS resource monitor, and add folders gradually.

Keep your files safe and in sync

Join the newsletter for the free troubleshooting checklist and outage alerts. Facing a specific error? Tell us about it and we will point you to the right fix.

Get the free checklistRequest a fix

About the author: Michael Johnny

Michael Johnny is a cloud sync and backup specialist with 10 years of hands-on experience setting up and troubleshooting OneDrive, Google Drive, Dropbox, iCloud, NAS and self-hosted sync tools. He writes every syncfix.cloud guide from the settings screens themselves and rechecks menu paths and limits when providers change them. More about syncfix.cloud.

Last updated: October 16, 2026. Menu names and limits can change after an app update; if something looks different, let us know.

Sources

  1. Resilio Sync (Resilio)
  2. Hyper Backup (Synology Knowledge Center)
  3. #StopRansomware Guide (CISA)
Resilio Sync NAS: Run Resilio on Your NAS (Step by Step) - Resilio Sync NAS: Run Resilio

هل أصلح هذا المشكلة؟

اترك تعليقاً

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

تم التصميم والسيو بواسطة قروش السيوواتساب +20 112 057 7167أعلن معنا